Vulcan 3kw swimming pool heater

Vulcan 3kw swimming pool heater

£320.00

Availability:
In Stock
Model:
Vulcan 3kw
Average Rating:

STAINLESS STEEL FLOW TUBE WITH TITANIUM HEATING ELEMENTS SWIMMING 3kw POOL HEATER
Suitable for Chlorinated In-Ground, Above Ground & Splasher Pools
13 amps
The Vulcan pool heater is manufactured from top quality components and materials at the elecro manufacturing plant here in the united kingdom. These units come fully equipped and pre-wired including a super sensitive flow switch, that allows safe coupling to Intex, Costco, Macro and Argos type splasher pools. They also come complete with a control thermostat and safety thermal cut out.
The heaters are very easy to install, requiring only final connection to a mandatory separate RCD.No pump interterlock is required. All heaters come fitted with 1½" BSP female threaded adapters for easy connection to all pipework. All heaters are supplied with hose tail adapters for connection to flexible pipework. .
FEATURES
FULLY EQUIPPED
EASY INSTALLATION
ROBUST, DURABLE CONSTRUCTION
ANALOGUE CONTROL WITH 1°C DIFFERENTIAL
TITANIUM HEATING ELEMENTS
BS 316 STAINLESS STEEL FLOW TUBE
ULTRA-RELIABLE FLOW SWITCH ALLOWS SAFE OPERATION AS LOW AS 1,000 LTR/H
CAN BE FLOOR OR WALL MOUNTED USING SWIVEL FOOT SUPPLIED
CONTROL THERMOSTAT AND SAFETY THERMAL CUT OUT (MANUAL RESET)
3 YEARS CONDITIONAL WARRANTY
Construction consists of a flow tube which is fitted with Inlet and Outlet mouldings manufactured from specially formulated polymer alloy material. Universal ABS unions are provided to allow solvent weld connection to the inlet and outlet pipe work. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium fulcrum pin.
The heater is supported on two swivel feet; these can swivel to permit either wall or floor mounting. The heater control components are positioned on the front face of the casing.
The water inlet and outlet fittings can facilitate connection to either metric or imperial standard pipe. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
Operation
The desired pool temperature can be easily set on the Vulcan heater using the panel-mounted thermostat dial in the case of the analogue model, in respect of the digital model by using the touch buttons, resulting in the temperatures being displayed clearly on the LCD screen. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
Specification & Models
Power supply: 230V single phase or 400V three phase (available for additiona charge)
Flow requirements: Minimum flow:- 3-kW to 6-kW = 1m3/h
9-kW to 15-kw = 4m3/h
Maximum flow:- 17m3/h
Heating Elements: Titanium, high MgO compaction.
Flow tubes: BS 316 Stainless Steel
Control thermostat (Analogue): 0 > 40°C (1°C differential)
Control thermostat (Digital): 0 > 40°C (0.5°C differential)
Safety thermal cut out: 55°C (manual reset)
Flow switch: Gold tipped reed switch with Titanium fulcrum pin
Wiring: High temperature, silicone sheathed, multi-strand copper conductors
Contactor: Schneider
Seals: Special formula high temperature polymer
Water connections: 1½” BSP female thread supplied with 1½” to 50mm ABS unions
Working pressure: 4 bar maximum
Mounting: Floor or wall mounting
Standards compliance: European Electromagnetic Compatibility directive 89/336/EEC and 93/068/EEC
 

Write Review

Note: HTML is not translated!

Bad            Good


Continue

Hope you are enjoying the sun

We are one of the UK's largest online swimming pool stores. This allows us to give you all the products you know and love at a very competitive prices. We are constantly updating our website and always looking for the latest products and designs to keep our customers up to date. .

Contact Us

0845 6048430